Shell - OpenGeometry

solid.operate(OG_OPERATION_SHELL, { thickness, instances? }) hollows a solid in place. It leaves one closed void, thickness inside every face.

import {
  OpenGeometry,
  Solid,
  Wire,
  OG_OPERATION_EXTRUDE,
  OG_OPERATION_SHELL,
  OG_PRIMITIVE_PROFILE,
} from 'opengeometry';

await OpenGeometry.create(
  { wasmURL: '/opengeometry_bg.wasm' },
  { workerURL: '/tessellation-worker.js' },
);

const dShape = new Wire(OG_PRIMITIVE_PROFILE, {
  start: [0, 0],
  segments: [
    { to: [0.36, 0] },
    { to: [0.36, 0.38], arc: { center: [0.36, 0.19], counterClockwise: true } },
    { to: [0, 0.38] },
    { to: [0, 0] },
  ],
  closed: true,
});
const cistern = new Solid(OG_OPERATION_EXTRUDE, { profile: dShape, distance: 0.3 });
cistern.operate(OG_OPERATION_SHELL, { thickness: 0.01 });
console.log(cistern.validity().valid);

What it takes

A cuboid, a cylinder, a sphere, a ring torus, a cone or frustum, a planar profile extrusion, or an extrusion of a line-and-arc profile with or without holes. The inner walls of a line-and-arc extrusion are its exact inset: lines parallel to the sides, arcs on the same centres, and arcs of radius thickness at inward corners.

Errors

Code	When
`InvalidParameter`	`thickness` is not finite, or not above four times the geometric tolerance
`UnresolvedIntersection`	The cavity would vanish, the inset is empty or splits, or two inset edges come too close
`SharedShape`	The shape is shared and `instances: 'all'` is not given
`CoverageGap`	A solid of another kind, such as a full-turn revolve
`UnsupportedGeometry`	A solid with approximate geometry

Not built: a sheet is not thickened into a solid. Sheet has no operate.

Keep the original

The shell changes the solid in place. To keep the solid too, shell a copy: solid.duplicate().

Last modified on November 10, 2026